Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips DC146 User Manual

Clock/Timer

STANDBY-ON
MIC RO S Y STE M DC14 6
iR
CD/CD - R/CD - RW COMPATIBLE
SOURC E
PRESE T
DOCK

Setting the clock

1
In standby mode, press and hold CLOCK/
DISPLAY on the remote control set for 2
seconds.
2
Press PROG to select 12-hour or 24-hour
display.
3
Press CLOCK/DISPLAY to confirm.
➜
The clock digits for the hours flash.
4
Press TUNING 4 ¢ (4 ¢ on the
remote control) to set the hours.
5
Press CLOCK/DISPLAY again.
➜
The clock digits for the minutes flash.
6
Press TUNING 4 ¢ (4 ¢ on the
remote control) to set the minutes.
7
Press CLOCK/DISPLAY to confirm the time.

Setting the timer

●
The system can be used as an alarm clock,
whereby the CD, iPod or TUNER is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
1
In standby mode, press and hold TIMER/
SLEEP about 2 seconds on the remote control.
2
Press SOURCE (or DISC/iPOD/TUN on
the remote control) to select sound source.
3
Press TIMER/SLEEP to confirm your desired
mode.
➜
The clock digits for the hours flash.
4
Press TUNING 4 ¢ (4 ¢ on the
remote control) to set the hours.
18
VOL
TUNING REPEAT DBB
VOL
5
Press TIMER/SLEEP again.
➜
The clock digits for the minutes flash.
6
Press TUNING 4 ¢ (4 ¢ on the
remote control) to set the minutes.
7
Press TIMER/SLEEP to confirm the time.
➜
The timer is now set and activated.
Notes: .
– If CD source is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
– If iPod source is selected and no iPod player is
docked, TUNER will be selected automatically.
Activating and deactivating
TIMER
●
In standby or during playback, press TIMER/
SLEEP once.
➜
Display shows
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
●
Press TIMER/SLEEP on the
remote control once or more.
➜
Display shows
of the sleep time options in
sequence: 60, 45, 30,15, 0,
60... if you have selected a
time.
●
To deactivate, press TIMER/SLEEP on the
remote control once or more until " 0" is shown,
or press STANDBY ON 2on the system (or
POWER on the remote control).
➜
disappears from the display.
if activated, and disappears if
and one iPOD
PROG
MENU
OK