Clock/Timer
M I C R O S Y S T E M M C M 1 9 6
Setting the clock
1
In standby, press and hold DISPLAY/CLOCK
(CLOCK on the remote control) for 2 seconds.
➜
The clock digits for the hours flash.
2
Press TUNING 4 ¢ to set the hours.
3
Press DISPLAY/CLOCK again.
➜
The clock digits for the minutes flash.
4
Press TUNING 4 ¢ to set the minutes.
5
Press DISPLAY/CLOCK to confirm the time.
Note:
– The backlight for clock display is off in standby.
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
1
In standby or active mode, press TIMER on the
remote control.
2
Press TUNING 4 ¢ to select sound
source.
3
Press TIMER to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press TUNING 4 ¢ to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press TUNING 4 ¢ to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating
TIMER
●
In standby or during playback, press
ALBUM/
Timer on/off once.
➜
Display shows
deactivated.
Activating and
deactivating SLEEP
The sleep timer enables the
system to switch off by itself
after a set period of time.
●
Press SLEEP on the remote
control once or more.
➜
Display shows
options in sequence: 60, 45, 30,15, 0, 60... if
you have selected a time.
●
To deactivate, press SLEEP on the remote
control once or more until " 0" is shown, or
press STANDBY ON on the system (or 2on
the remote control).
➜
if activated, and disappears if
and one of the sleep time
disappears from the display.
15