Clock/Timer; Setting The Clock; Setting Timer; Activating And Deactivating Timer - Philips MC-30/25 User Manual

Clock/Timer

STANDBY-ON
iR
M C - 3 0 M I C R O S Y S T E M
FWD á/ë
SHUFFLE
RDS/ CLOCK SIDE A/B SOURCE
TUNING
REPEAT
TIMER ON•OFF PROGRAM REW à /í REV MODE/ BAND

Setting the clock

There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting (RDS versions
only)
1
Tune to a RDS station (see TUNER).
2
Press CLOCK for more than 2 seconds.
➜ SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1
In standby, press CLOCK.
➜ The clock digits for the hours flash.
2
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
3
Press CLOCK again.
➜ The clock digits for the minutes flash.
4
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
5
Press CLOCK to confirm the time.
18
pg 001-021/MC30/22-Eng
¶ The system can be used as an alarm clock,
¶ You can also use it to record a favourite tuner
¶ During setting, if no button is pressed within 90
STOP PLAY•PAUSE
PRESET
VOLUME
RECORD 1
2
3
4
5
6
7
¶ In standby or during playback, press TIMER
18

Setting TIMER

whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
programme at a set period (REC TUN, see TAPE
RECORDER)
seconds, the system will exit timer setting mode
automatically.
In any mode, press TIMER ON•OFF for more
than 2 seconds.
Turn VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE
or REC TUNER.
Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
,
is shown.
Display sequence scrolls SET ON TIME and
flashes. The clock digits for the hours flash.
TIMER
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
ON•OFF on the system once (TIMER on the
remote control).
➜ Display shows
if activated, and
disappears if deactivated.
12/7/00, 1:33 PM
or
RECORD
3140 115 27913