Table of Contents
Advertisement
3.2.5 To examine the oil level
Examine the level of the engine oil when the engine is
stopped and in a level position.
1. Remove the oil filler cap dipstick (M) and wipe it
clean.
Figure 11
2. lnsert and remove the dipstick without screwing it
into the filler neck. Check the oil level shown on the
dipstick.
3. lf the oil level is low, fill to the edge of the oil filler
hole with the recommended oil .
4. Screw in the oil filler cap dipstick (M) securely.
M
Figure 12
O. Upper limit
N. Lower limit
Note: Running the engine with a low oil level can
cause engine damage.
O
N
Prepare and do servicing on the product
3.2.6 To examine the engine oil filter
1. Remove the oil filter retaining bolt.
2. Pull the oil filter cap out and remove the oil filter.
Figure 13
3. Clean the oil filter or replace if damaged.
4. Install the oil filter.
5. Make sure the oil filter cap is fully seated.
6. Install and tighten the oil filter retaining bolt.
English - 9
Advertisement
Table of Contents
