Table of Contents
Advertisement
C
D
Figure 3
Driving over a discharge hose while the pump is run-
ning, or even possibly when the pump is stopped, may
cause pump case failure.
To start the engine
1. Fill the product with fuel and engine oil.
2. Prime the pump.
3. Open the fuel valve.
Figure 4
4. Move the knob down to the "START" position and
tighten it.
Figure 5
5. Press down decompression lever.
Prepare and do servicing on the product
Figure 6
6. Pull the recoil starter until the resistance is felt, and
then return the hand back to previous position.
I
Figure 7
7. Push the decompression lever down and release it
After the start of a diesel engine, the decompression
lever will return to its previous position automatically.
8. Pull the handle starter all the way out with a strong
and even motion. Use two hands if necessary. After
start, return recoil handle bar back lightly, and do
not let it spring back suddenly.
English - 7
Advertisement
Table of Contents
