Parts List - Summit 82061 Manual

1
INDEX
2

PARTS LIST

TROPHY CHAIR BOX CONTENTS
PN DESCRIPTION
10922 SEAT POST ASSEMBLY
10923 ARM SUPPORT ASSEMBLY
10924 SUPPORT TUBE
70276 FOAM SEAT
72023 ACCESSORY PACKET
22023 - ACCESSORY PACKET CONTENTS
PN DESCRIPTION
22023 HARDWARE PACKET
12" FOAM ARM PAD
10656 IN-LINE CABLE TIES
30325 CAM BUCKLE TREE STRAP
30285 TOURNIQUET BUCKLE STRAP (GREEN)
INSTRUCTIONAL DVD
WRITTEN INSTRUCTIONS
3
TOOLS
Tools
• 7/16" Wrench / Socket with Ratchet
• Phillip's Head Screw Driver
• Knife or snips
4
ASSEMBLY
1. Position one Support Tube as shown in figure 1.
2. Assemble the Support Tube by sliding it up against
the Arm Support as shown in figure 2. Insert one,
3/4" bolt from the outside through the
as shown. Place a Washer
Arm Support and the Support Tube. Secure with one
lock nut. Do not overtighten this connection as it is
designed to slide backwards and forwards through the
slot in the Arm Support.
PG 2
GENERAL WARNINGS AND PRECAUTIONS, STAND WEIGHT LIMITS
SECTION 1 - INDEX
SECTION 2 - PARTS LIST
SECTION 3 - TOOLS REQUIRED
SECTION 4 - ASSEMBLY
SECTION 5 - INSTALLATION AND USE
SECTION 6 - USE WITH AN ELEVATED PLATFORM
SECTION 7 - MAINTENANCE AND CARE
SECTION 8 - HARNESS SUSPENSION
SECTION 9 - LIMITED WARRANTY
QTY
1
1
2
1
1
QTY
1
2
4
1
1
1
1
METAL bushing
between the inside of the
Please call 256-353-0634 or visit http://www.summitstands.com/contactus/
if you have any questions, if you need replacement parts, if you have any missing
parts or if the included DVD does not play.
22023 - HARDWARE PACKET CONTENTS
PN DESCRIPTION
10641 SHORT SHANK BUSHING
10605 3/4" BOLT (1/4 x 20)
10612 LOCK NUT (1/4 x 20)
10628 SELF TAPPING SCREW
10625 WASHER
10627 METAL BUSHING
Use
Bolts
Self Tapping Screws
In-Line Cable Tie trimming
1
PG 1
PG 2
PG 2
PG 2
PG 2 - 3
PG 4
PG 5
PG 5
PG 6
PG 6
QTY
6
6
6
2
2
2
ARM
SUPPORT
(PN 10923)
SUPPORT
TUBE
(PN 10924)
www.summitstands.com