Advertisement
1
INDEX
2
PARTS LIST
SWIFTREE BOX CONTENTS
PN
DESCRIPTION
UPPER LADDER SECTION
LOWER LADDER SECTION
STAND OFF BRACKETS
HARDWARE PACKET
10880
SAFETY / INSTRUCTIONAL DVD
18013
WRITTEN INSTRUCTIONS
18007
WARRANTY CARD
3
TOOLS REQUIRED
Tools
•
7/16" Wrench / Socket with Ratchet
4
ASSEMBLY
SWIFTREE SECTION ASSEMBLY
1. Position the ladder column as shown in figure 1.
The triangle shaped rungs are welded on the side facing
the user. The stand off bracket should be positioned so
that it is on the side that faces the tree.
2. Insert the 1.5" bolt through the column section as
shown in figure 1.
3. Place the stand-off bracket over the protruding bolt
and securely tighten the lock nut as shown in figure 2.
4. Repeat for the other two ladder sections (17' Model)
or three ladder sections (22' Model).
PG 2
GENERAL WARNINGS AND PRECAUTIONS, STAND WEIGHT LIMITS
SECTION 1 - INDEX
SECTION 2 - PARTS LIST
SECTION 3 - TOOLS REQUIRED
SECTION 4 - ASSEMBLY
SECTION 5 - INSTALLATION AND USE
SECTION 7 - MAINTENANCE AND CARE
SECTION 8 - LIMITED WARRANTY
QTY
2 (17') / 3 (22')
1
3 (17') / 4 (22')
1
1
1
1
TOWARD TREE
Please call 256-353-0634 or visit http://www.summitstands.com/contactus/
if you have any questions, if you need replacement parts, if you have any missing
parts or if the included DVD does not play.
HARDWARE PACKET CONTENTS
PN
DESCRIPTION
1 1/2", 1/4x20 BOLT
LOCK NUT, 1/4x20
Use
Stand off bracket bolts
1
1 1/2" BOLT
PG 1
PG 2
PG 2
PG 2
PG 2 - 3
PG 4 - 5
PG 6
PG 6
QTY
3 (17') / 4 (22')
3 (17') / 4 (22')
STAND OFF
BRACKET
LOCK NUT
LADDER COLUMN
www.summitstands.com
Advertisement
