Master; Knob Mode; Knob Speed; Tempo Lock - Ashun Sound Machines HYDRASYNTH Owner's Manual

Master: Page 2
Control knob Function
1

Knob Mode

2

Knob Speed

3

Tempo Lock

4 Macro Button Toggle, Trigger,
5

Safe Edit

Knob Mode
This setting governs the response of the
Variable knobs (p. 16)
Arpeggiator sections, not the
(p. 16).
• Absolute: the parameter value jumps to
the physical position of the knob
• Pickup: the knob must pass through the
parameter value before an edit will happen
• Scale: parameter value edit begins from
the current knob position; the remaining
throw of the knob covers the remaining
range of the parameter. After the knob
reaches its minimum or maximum position
the parameter value range conforms to
the physical position of the knob (see
Absolute).
Knob Speed
This determines the response speed of the
Control knobs only. It also affects the finer
[SHIFT] + scroll movements. With a setting of
Slow a full turn is required to cover the full
parameter range; with a setting of Fast it takes
less than half a turn, which can also sacrifice
parameter resolution.
Settings
Absolute, Pickup,
Scale
Slow, Medium,
Fast
On, Off
Switch, Reset
On, Off
in the Filter and
Selection knobs
85
Description
How Direct knobs edit values when
moved
Sets Control knob response speed
Selects Global tempo or per-patch tempo
Determines behavior of Macro Buttons
Prevents accidental loss of edited patch
Tempo Lock
Each patch stores its own Tempo setting.
Setting Tempo Lock to On enables the tempo
to remain the same while selecting patches.

Macro Button

These settings are described in the
Button Response (p. 71)
Mastering the Macros chapter.
Safe Edit
With this parameter set to On, if you try to
select another patch before saving an edited
patch, a message will ask for confirmation
first. If a Macro control was the only thing
changed, the confirmation message will not
be displayed.
Note: This does not prevent Hydrasynth from
responding to MIDI program changes.
Macro
section of the