Additional Arp Features; Latch And Sustain; Initialize The Arp - Ashun Sound Machines HYDRASYNTH Owner's Manual

Additional Arp Features

Latch and Sustain

Press [LATCH] to activate Latch mode. This
enables you to take your fingers off the keys or
pads and use both hands to adjust parameters
while an arpeggio is running.
Use [SHIFT] + [LATCH] to activate Sustain
mode. This works whether an arpeggio is
running or not. It's the same response as using
a sustain pedal.
Between these two parameters there are four
potential combinations, as shown below. The
lighting of the [LATCH] button LED provides a
visual clue as to which settings are active.
Latch Sustain [LATCH] LED status
On Off
On On
Off On
Off Off

Initialize the Arp

Hold [SHIFT] and press the [ON] button
to initialize the Arpeggiator module. All
parameters will return to their defaults.
68
Button lit constantly
Flashing cycle: 0.8s lit, 0.2s
unlit
Flashing cycle: 0.5s lit, 0.5s
unlit
Button dimly lit