Table of Contents
Advertisement
Quick Links
Household gas detector
To protect your family
The elegance and the prestige, that have always made BEINAT S.r.l stand out from its competitors, together with
the concept of home fitness comes the household gas detector GS913 detects through the Semiconductor , the
presence of explosive gas such as: LPG.
Gas detection
The detector is tested and calibrated to 10% of L.E.L.
Through the built-in relay, the GS913 can activate: solenoid valves, sirens, and any other device alarm
A series of technical features make this gas detector extremely versatile, reliable, accurate, and safe.
through an internal jumper it is possible to select the relay impulse functioning, to connect manual reset solenoid
valves, or the continuous functioning, to activate class "A" solenoid valves and sirens.
The relay, free of voltage, allows installation of multiple detectors on a single solenoid valve ensuring control of
multiple dangerous environments.
The detector is complete with a special circuit that controls the semiconductor sensor's efficiency level, and
signals any possible fault.
These technical features make the detector ideal for the safety of civil environments according to EUROPEAN
STANDARD.
Important: Assembly / maintenance of the appliance must be carried out by qualified personnel and in
accordance with applicable laws and regulations.
The manufacturer assumes no responsibility for the use of products that have to comply with particular
environmental and / or installation standards.
Important note
Before connecting the equipment, it is recommended that you read the instruction manual carefully and
keep it for future reference. It is also recommended to perform the electrical connections correctly as
per enclosed drawings, observing the instructions and the Standards.
N.B. Refer to the documentation in all cases where the symbol is on the side
Installation and user
guide
12 VDC
Electric connections also available on
Empresa Asociada
GS913-
12 VDC
CONFORMITY
EN 50194
CEI 216-3
EN 50270
Channel: Beinat gas solutions
V. 6
Advertisement
Table of Contents
Related Manuals for BEINAT GS913- V.6
Summary of Contents for BEINAT GS913- V.6
- Page 1 12 VDC 12 VDC The elegance and the prestige, that have always made BEINAT S.r.l stand out from its competitors, together with the concept of home fitness comes the household gas detector GS913 detects through the Semiconductor , the presence of explosive gas such as: LPG.
- Page 2 When doing the electrical connections, follow the drawing closely. Any use of the detector for purposes other than the intended one is considered improper, and as a result of which BEINAT S.r.l. therefore disclaims any responsibility for possible damages caused to people, animals or objects.
- Page 3 Components and commands Power Fault Alarm Output Segnale di fault max 0,05 mA 1) MAINS connected indication LED (ON). 2) FAULT indication LED. If this LED turns on, it means that the gas detection semiconductor sensor is not working efficiently and must be replaced by an authorized service center. 3) ALARM indication LED.
- Page 4 Installation measures and positioning The position of the detector is a crucial factor for its correct functioning during gas detection. In order to obtain the maximum results from a device and minimize the probability of false alarms, it is recommended to follow this scheme and keep in mind the following general regulations. The detector must be located at different heights, according to the type of gas.
- Page 5 Before calling a technician ... - If the device does not start up. Check that the 12V dc power is correctly connected. - If the fault LED lights up. If the YELLOW LED is remains ON, check the detection capsule status. It is probably faulty and has to be replaced.
- Page 6 Electrical Connections WARNING. Before connecting to the mains power, ensure the voltage is correct. Carefully follow the instructions and the connections according to Regulations in force, keeping in mind that the signal cables should be laid separate from the power cables. Connection Scheme of GS913 Detector WARNING ! The relay is voltage free.
- Page 7 One o detector with 12V normally open valve WARNING ! The relay is voltage free. Contact capacity 5A@24 VDC SELV Output Segnale di fault max 0,05 mA Power Supply 12 VDC Solenoid Valve One or more detectors with 12V normally open valve Power Supply 12 VDC One or more detectors with 12VDC normally closed valve...
- Page 8 Defects caused by unauthorized personnel tampering, incorrect installation and negligence resulting from phenomena outside normal functioning shall be excluded from the warranty. BEINAT S.r.l. is not liable for possible damage, direct or indirect, to people, animals, or things; from product faults and from its enforced suspension of use.
Need help?
Do you have a question about the GS913- V.6 and is the answer not in the manual?
Questions and answers