BEINAT NASE25 Manual

Functions - Explosive gas detection
Since the human being discovered the GAS, he has noticed its usefulness and since
then he uses it for cooking, warming, and today in the industrialization.
But he has also discovered its dangerousness.
To carry it the common people turn to technicians who need to be assured that their
work is free of dangers. To do this we need a reliable and secure control tool.
With its prestige that for over forty years distinguishes it, and from the concept
of "Fitness equipment", BEINAT S.r.l. has developed the portable gas detector
NASE25.
Explosive Gas Detection
The modernity of this instrument and its precision in the detection are due to a
catalytic sensor whose response is managed by a microcontroller.
When an explosive gas is detected, in addition to emitting a beep, the display flashes
red and indicates the percentage concentration of gas dispersed in the environment.
Reading range from 3% to 100% of the LEL with 1% LEL resolution.
NASE25 reading can also be performed in a low lighted environment as the display is backlit.
The charge and discharge of the AAA battery is controlled by the microprocessor reporting on the display the percentage
of charge.
Thank you for choosing the BEINAT S.r.L. digital tool, model NASE25.
This manual was designed to help you obtain the best results and efficiency from the product.
Important Note
Read these instructions carefully before use and always keep them within hands reach while using the
instrument.
The illustrations and texts shown on the screens in this manual may differ from those actually displayed
The brand products BEINAT S.r.L.
BATTERIES AND ACCUMULATORS 2006/66/EC RAEE 2003/96/EC

User Guide
Portable Gas Detector NASE25
comply with European Directives ROHS 2002/95/EC, REACH 1907/2006,
Electric connections also available on
Bel ongi ng
CONFORMITY
EN 50194
CEI 216-3
EN 50270
Channel: Beinat gas solutions
V. 1