Table of Contents
Advertisement
b. Select the system that you want to power on.
c. In the content pane, click Actions > View All Actions > Power On.
d. Click OK.
2. To activate a logical partition, complete the following steps:
a. In the navigation area, click the Resources icon
b. Click the logical partition name that you want to activate.
c. In the navigation area, click Partition Actions > Operations > Activate.
d. Click OK.
3. To activate a logical partition for a specific system, complete the following steps:
a. In the navigation area, click the Resources icon
b. Click the system name in which you want to activate the logical partition.
c. Select logical partitions that you want to activate.
d. In the content pane, click Actions > Activate.
e. Click OK.
4. To verify that the logical partition start policy is set to User-Initiated, complete the following steps:
a. In the navigation area, click the Resources icon
b. Click the system name to view details.
c. In the navigation area, click Properties > Other Properties.
d. Click the Power-On Parameters tab. Ensure that the Partition start policy field is set to
User-Initiated.
Starting an IBM PowerKVM system
You can use the Intelligent Platform Management Interface (IPMI) to start an IBM PowerKVM system.
To start an IBM PowerKVM system, run the ipmitool -I lanplus -H FSP IP -P ipmipassword chassis
power on command from a remote system.
Connector locations
Learn about connector locations for the ESLL and ESLS storage enclosures and the servers that they
connect to.
Choose from the following options:
v "Connector locations for the 5147-024, ESLL, and ESLS storage enclosures" on page 31
v Connector locations for the 247-21L, 8247-22L, and 8284-22A systems
v Connector locations for the 8286-41A systemConnector locations for the 8286-42A system
v "Connector locations for the 8247-42L and 8286-42A systems" on page 32
v Connector locations for the 8408-44E and 8408-E8E systems
v Connector locations for the 9080-MHE, 9080-MME, 9119-MHE, and 9119-MME systems
30
Power Systems: Installing the Model 024, ESLL, or ESLS storage enclosure
, and then click All Partitions.
, and then click All Systems.
, and then click All Systems.
Hide quick links:
Advertisement
Table of Contents
