Thales TTT-Compact II Manual page 8

5) Internal power supply TTT-Compact II
The TTT-Compact II is fitted with a high-power-battery-pack. The turntable is driven by the
internal power supply only. The external charger is to be used for charging the battery only.
Please refer to the table on the right hand side.
Important notes:
- A fully charged battery-pack will keep the turntable running in playback mode
for at least 12 hours.
- We are using most modern Li-Ion batteries. These accumulators do have no
memory-effect. This means, you are free to charge them no matter what the ac-
tual charge state is. The battery can be recharged for at least 1'000 cycles.
- The battery-pack can provide power up to 100 Watts. This energy is set free by
incorrect handling of the accumulator as well. Therefore, the battery needs to be
exchanged by your distributor / dealer only.
- The external charger can produce emissions (electrical field, noise). Therefore,
we recommend to unplug it completely from the power-plant while playing mu-
sic. Alternatively, you can use a switchable socket to switch the charger on while
charging only.
Page 8/10
Standby: The unit is ready to be started by
the push-buttons at the front (33/45). The
external power supply is disconnected elec-
I
trically from the circuit. Standby-current is
limited some µA only, so the battery keeps
its charge state for many months.
Off: The unit is disconnected completely
0 from the internal and external power-sup-
ply.
Charging: If the external charger is con-
nected, the battery will be charged. The
II
charge state is shown on the external
charger.