Pitney Bowes AddressRight 200 User Manual page 57

Safety
Operation of this equipment without periodic maintenance will inhibit optimum operating
l
performance and could cause the equipment to malfunction.
If the unit becomes damaged, unplug it from the wall.
l
Keep fingers, long hair, jewelry and loose clothing away from moving parts at all times.
l
Always follow specific occupational safety and health standards for your workplace.
l
Remove jammed material gently and carefully.
l
To reduce the risk of fire or electrical shock, DO NOT attempt to remove covers or disassemble the
l
control panel or its base. The cabinet encloses hazardous parts.
Avoid touching moving parts or materials while the machine is in use. Before clearing a jam, be
l
sure machine mechanisms come to a complete stop.
Before operating the AddressRight™ Printer/Feeder, make sure that it has been properly
l
prepared and that any other personnel in the area are standing clear of the machine.
Immediately report to service any damaged or non-functioning components that renders the unit
l
unsafe.
DO NOT remove covers. Covers enclose hazardous parts that should only be accessed by
l
properly trained service personnel.
DO NOT run printer with top cover open.
l
Running the printer with top cover open increases the risk of entanglement with moving parts.
l
To prevent overheating, do not cover vent openings.
l
DO NOT place lighted candles, cigarettes, cigars, etc., on the system.
l
Contact Your System Supplier for:
l
Supplies
l
Material Safety Data Sheets
l
If you should damage the unit
l
Required maintenance service schedule
l
Servicing
This product is serviceable. For service inquiries in the USA, please visit pitneybowes.com/support.
This Equipment contains a Radio Frequency Transmitter operating in the 2.4 or 5 GHZ ISM band.
Pitney Bowes User Guide November 2019 57