Adjusting The Horizontal Alignment; Adjusting The Vertical Alignment - Pitney Bowes AddressRight 200 User Manual

Adjusting the Horizontal Alignment

Horizontal alignment adjusts offset of individual printheads (side-to-side) offset to fine tune horizontal
positioning of the printout.
To adjust the horizontal alignment:
1. Tap Printer Setup on the Main Menu, or press the Quick Menu button on the Control Panel.
2. Tap Horizontal Alignment.
3. Select the desired printhead.
4. Tap the directional arrows to move the bar in the desired direction. You can align individual
printheads up to ±100.0 microns in 5.0 micron increments.
5. Tap Reset to reset the horizontal alignment to 00.0 (default).
6. Tap Test Print to print a test page using the current adjustments and print parameters to check
printing quality and printhead alignment.

Adjusting the Vertical Alignment

Vertical alignment disables the top nozzles in individual printheads to remove any overlap to fine tune
vertical positioning of the printout.
To adjust the vertical alignment:
Pitney Bowes User Guide November 2019
Operating the Printer
14