Pitney Bowes AddressRight 200 User Manual page 35

Menus and Options
Tray Break: The printer will search for break marks (spaces between media pieces) and respond
according to the settings. To pause or set a gap within a print job, select the edit (paper/pencil) icon, then
set the desired option:
Select Feeder Stopand set the timer to pause/stop the feeder at predesignated breaks during a
l
print run. Enter time in seconds (1-60). On sensing the break mark, the feeder stops for the
specified number of seconds.
Conveyor Gap is used when the printer is set up in line with other mailing equipment (conveyors,
l
tabbers, etc.) When this feature is activated, the printer responds to the break mark by sending a
signal to the conveyor to speed up momentarily. This creates an obvious gap between the end of
one set of pieces and beginning of the next. Select and set the gap on a conveyor between
predesignated breaks during a print run. Enter the distance between the media sensor and the
conveyor. The printer sends a delayed signal to an external device and continues to feed.
Continuous Batch Counter:
Unchecked: Batch Counter resets before each job
l
Checked: Batch Counter does not reset before each job
l
Feeder Delay: Used to lengthen the time between pieces being fed. Used for jobs that require longer
drying time before they are stacked.
Pitney Bowes User Guide November 2019 35