Replacing The Speed Encoder; Figure 9-1 Detailed View Of The Speed Encoder - Siemens SIMOTICS HT Series Operating Instructions & Installation Instructions

9.2.4

Replacing the speed encoder

①
②
Figure 9-1
To remove the speed encoder, proceed as follows:
1. Unscrew the speed encoder cover.
2. Detach the electrical connection.
SIMOTICS HT Series HT-direct 1FW4...1......A
Operating Instructions 11/2018
Touch protection
Torque arm
Detailed view of the speed encoder
– Carefully withdraw the cable out of its holder.
– Withdraw the connector.
9.2 Corrective Maintenance
③
Speed encoder
④
Shaft journal
Maintenance
105