Figure 3-2 Rating Plate Diagram - Siemens SIMOTICS HT Series Operating Instructions & Installation Instructions

Low-voltage motor
Table of Contents

Advertisement

Rating plate
Figure 3-2
Degree of protection
The machine is available with degree of protection IP55.
Ambient conditions
The standard machines are not suitable for use in corrosive atmospheres, atmospheres with
a high salt content, or outdoor applications.
SIMOTICS HT Series HT-direct 1FW4...1......A
Operating Instructions 11/2018
Motor type: Three-phase motor
Motor type: Synchronous motor, order num‐
ber
Serial number
Type
Temperature class
Degree of protection
Rated torque [Nm]
Rated speed [rpm]
Induced voltage
Motor weight [t]
Rating plate diagram
Maximum operating speed [rpm]
Operating mode
Required amount of cooling water [l/min] at
the maximum cooling water inlet tempera‐
ture [°C]
Maximum water pressure [bar]
Rotors, standards and regulations
Rated power [kW]
Rated current [A]
Rated frequency [Hz]
Rated voltage [V]
Description
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotics ht-direct series

Table of Contents