Table of Contents
Advertisement
Connection
5.3 Industrial Ethernet
Requirement
● You are familiar with handling of the stripping tool. Refer to the installation instructions
provided with the connector.
● The stripping tool is set to a blade distance of 5.1 mm.
Pin assignment for the RJ45 connector of a PROFIBUS cable
Note the following when you use the PROFIBUS cable PB FC Standard Cable GP with data
connector IE FC RJ45 Plug 4x2:
Data connector
Pin number
1
2
3
4
5
6
7
8
Note
If you use cables with a length > 500 m, connection establishment can take up to 2 minutes.
Note
If you connect a BusAdapter BA 2xRJ45VD HA to existing PROFIBUS cabling, the same
requirements relating to shield contact and the lightning protection concept apply as for
PROFIBUS.
30
Color
Green/white
Green
Orange/white
Blue
Blue/white
Orange
Brown/white
Brown
PROFIBUS cable
Wire color
Green
Red
-
-
-
-
-
-
Operating Instructions, 06/2018, C79000-G8976-C472-01
SIMATIC BusAdapter
Advertisement
Table of Contents
