Table of Contents
Advertisement
Technical data
The following technical specifications apply to the BusAdapter BA 2xRJ45VD HA.
Technical specifications
Attachment to Industrial Ethernet
Electrical connectors
Permitted cable lengths
Copper cable
Fast Ethernet
Electrical data
Power supply
Current consumption
Effective power loss
Fusing
Permitted ambient conditions
Ambient temperature
Relative humidity
SIMATIC BusAdapter
Operating Instructions, 06/2018, C79000-G8976-C472-01
Quantity
2
Pin
RJ45 jack
Properties
Half/full duplex, MDI-X pinning
Without retaining collar
Transmission speed 10 / 100 Mbps
10 Mbps
IE FC TP Standard Cable GP 2X2 with
IE FC RJ45 plug 2x2
PROFIBUS FC Standard Cable GP with
IE FC RJ45 plug 4x2
100 Mbps
PROFIBUS FC Standard Cable GP with
IE FC RJ45 plug 4x2
IE FC TP Standard Cable GP 2X2 with
IE FC RJ45 plug 2x2
IE FC TP standard cable GP 4x2 (24 AWG) with
IE FC RJ45 plug 4x2
The BusAdapters are supplied with power (3.3 V SELV) by the basic device. No other power
supply is permitted.
500 mA
1.65 W
The BusAdapters do not have their own fuses. The fuse is in the basic device.
During operation
Horizontal installation
Operating altitude
Vertical installation
up to 2000 m above
sea level
1)
During storage
During transportation
During operation at 25 ℃
-40 °C to +70 °C
-40 °C to +60 °C
-40 ℃ to +85 ℃
-40 ℃ to +85 ℃
≤ 95% no condensation
7
300 to 500 m
100 to 1000 m
0 to 100 m
0 to 300 m
0 to 500 m
35
Advertisement
Table of Contents
