Additional Functions Of An Msu-1000/1500 In 3D Operations - Sony HDFA-200 Operation Manual

Additional Functions of an MSU-1000/
1500 in 3D Operations
Operations of CCU 3D Monitor functions
1
Select CCU on the Maintenance menu screen.
Maintenance
Camera Lens CCU
2
Select 3D Monitor.
CCU
Monitor 3D
Phase
Output Monitor
Clear 3D Monitor
Select Mode
Left 3D Monitor Right
3
Select a signal to be output from the Monitor Output
connector of a CCU on the Select tab.
For a CCU with an HKCU2005 3G Signal Link Interface
Unit mounted, 3D Monitor can be selected.
4
Select a function to be used on the Mode tab.
CCU
Monitor 3D
Phase
Output Monitor
Clear 3D Monitor
Select Mode
3D Monitor Mode
Side by Side
5
Move the border line by pressing the Border Line if the
Split or Mirror function is selected.
Exit
SD
VCS
Adjustings
Exit
1/1
CAM Ctrl
Position
14
Exit
1/1
CAM Ctrl
Border
Line
Position
14
6
Select a camera to be controlled in 3D mode with the
buttons of 3D Camera Control on the CAM Ctrl tab.
CCU
Monitor 3D
Phase
Output Monitor
Clear 3D Monitor
Select Mode
3D Camera Control
Left Only Both Right Only
The same selection can be made on the 3D CAM Control page
of the Configuration menu.
Setting the 3D Mode
1
Select 3D System on the Configuration menu screen.
Configuration
Camera CCU MSU
RCP Multi 3D
Assignment Format System
2
Select 3D Mode.
3D System
3D Mode
3D CAM
Control
3
Set 3D Mode to ON.
Exit
1/1
CAM Ctrl
Position
14
Exit
CNU
Exit
Channel
ID
Appendices
39