Setting The Channel Id - Sony HDFA-200 Operation Manual

3D Mode
3D Mode
ON
3D mode is set.

Setting the Channel ID

Channel ID is a function to display the identifier of the output
signal to distinguish the two HD signals in Dual-Link or
3D-L/R connection.
1
Select 3D System on the Configuration menu screen.
Configuration
Camera CCU
RCP Multi
Assignment Format
2
Select Channel ID.
3D System
3D Mode
3D CAM
Control
3
Set Channel ID to ON.
40
Appendices
Exit
Exit
MSU CNU
3D
System
Exit
Channel
ID
Channel ID 3D Mode
3D Mode
Channel ID
ON
ON
Setting the 3D Camera Control
When 3D Mode is set to ON, two cameras are normally
controlled simultaneously. Some items for painting can be
controlled separately to match the color tone between the two
cameras. If Left Only or RIght Only is selected, specified items
of the selected camera can be controlled.
The 3D Camera Control function enables setting the switches
for this function on the panel.
1
Select 3D System on the Configuration menu screen.
Configuration
Camera CCU MSU
RCP Multi 3D
Assignment Format System
2
Select 3D CAM Control.
3D System Channel ID
3D Mode
3D CAM
Control
Channel ID
ON
3
Select a camera to be controlled.
Exit Exit
Exit
CNU
Exit
Exit
Channel
ID