Specifications - Sony HDFA-200 Operation Manual

• To prevent data loss, make backups of data frequently. In no
event will Sony be liable for any loss of data.
• Unauthorized recording may be contrary to the provisions of
copyright law. When you use a "Memory Stick" that has been
pre-recorded, be sure that the material has been recorded
in accordance with copyright and other applicable laws.
• "Memory Stick" and
• "Memory Stick Duo" and
Sony Corporation.
• "Memory Stick PRO Duo" and
trademarks of Sony Corporation.

Specifications

General
Power requirements
Operating temperature
Storage temperature
Mass
Input/output connectors
CCU
CAM-MAIN(L) SDI IN,
CAM-SUB(R) SDI IN
CAM-MAIN(L) REF OUT,
CAM-SUB(R) REF OUT
SDI 1 OUT, SDI 2 OUT
TEST OUT
PROMPTER1/GENLOCK
IN
VF
AUDIO IN 1, AUDIO IN 2
INTERCOM
DC IN
CAM-MAIN(L) DC OUT
CAM-SUB(R) DC OUT
DC OUT 4A max
DC OUT 0.5A max
CAM-MAIN(L) REMOTE,
CAM-SUB(R) REMOTE
REMOTE
AUX
36
Appendices
are trademarks of Sony Corporation.
are trademarks of
are
240 V AC, 1.2 A (max.)
180 V DC, 1.1 A (max.)
12 V DC, 10 A (max.)
−20°C to +45°C (−4°F to +113°F)
−20°C to +60°C (−4°F to +140°F)
Approx. 3.8 kg (8 lb 6 oz) (the main unit
only)
Optical/electrical multi-connector (1)
BNC type (1 each)
BNC type (1 each)
BNC type (1 each)
BNC type (1)
BNC type (1), 1 Vp-p, 75 ohms
20-pin (1)
XLR 3-pin, female (1 each)
For MIC: −60 dBu (variable up to −20
dBu by menu or HDCU1000/1500
operation), balanced
For LINE: 0 dBu, balanced
XLR 5-pin, female (1 each)
XLR 4-pin (1), 10.5 to 17 V DC
XLR 4-pin, female (1), 10.5 to 17 V DC,
1)
5.5 A maximum
XLR 4-pin, female (1), 10.5 to 17 V DC,
1)
4 A maximum
XLR 4-pin, female (1), 10.5 to 17 V DC,
1)
4 A maximum
4-pin (1), 10.5 to 17 V DC, 500 mA
maximum
8-pin (1 each)
8-pin (1)
12-pin (1)
RET CTRL
TRACKER
CRANE
Supplied accessories
Operation manual (1)
Cable clamp belt (1)
Optional accessories
HD Electronic Viewfinder
HDVF-C550W (5-type, color)
HDVF-C730W (6.5-type, color)
HDVF-C950W (9-type, color)
HDVF-EL75 (7.4-type, color)
"Memory Stick Duo," "Memory Stick PRO Duo"
Related equipment
HDCU1000/1500 HD Camera Control Unit
HKCU-HB10/HB15 3G Fiber Transmission Unit
HKCU1005 SDI Output Expansion Unit
HKCU2005 3G Single Link Interface Unit
HDC-P1 HD Multi Purpose Camera
HDC1500R/1400R/1600R/1500/1600 HD Color Camera
F35 Digital Cinematography Camera
MSU-1000/1500 Master Setup Unit
RCP-1000-series Remote Control Panel
1) May be limited with the status of load, input (see page 14)
For the customers in the U.S.A., Canada, Europe,
Australia, and New Zealand
Connectors for optical/electric composite cables:
• LEMO PUW.3K.93C.TLCC96 (to the "CAMERA"
®
connector on CCU)
• LEMO EDW.3K.93C.TLC (to the "CCU" connector on an
®
HDFA-200)
Caution on the optical/electric composite cable:
For connection between the camera control unit and an HDFA-
200, be sure to use an optical/electric signal composite cable
with the connectors specified in this manual in order to comply
with the limit for EMC regulations.
Pour les utilisateurs aux Etats-Unis, au Canada, en
Europe, à l'Australie, et à la Nouvelle-Zélande
Connecteurs pour les câbles optiques/électriques composites:
• LEMO PUW.3K.93C.TLCC96 (au connecteur
®
«CAMERA» de l'unité de commande de caméra)
• LEMO EDW 3K.93C.TLC (au connecteur «CCU» d'une
®
HDFA-200)
Précaution concernant le câble optique/électrique
composite:
Pour la connexion entre l'unité de commande de caméra et
une HDFA-200, utilisez un câble optique/électrique composite
avec connecteurs spécifiés dans ce manuel pour assurer la
1)
conformité avec la réglementation EMC.
6-pin (1)
10-pin (1)
12-pin (1)