Counting Function; Sampling; Check Weighing; Totalizing - Excell KWH4 Series User Manual

EXCELL PRECISION CO., LTD.

2-3 Counting Function

2-3-1 Sampling


Press
shows ,

Select sample quantity and then place samples on the platter, and then press
key, the display shows "
After stable, the scale enters into counting mode and the display shows sample
quantity.
 Sample Too Small (
 Unit Weight Too Small (

When sampling, the above two symbols indications are on. Under such conditions,
the scale can still work, but may result in lower count precision.

When using 2-segment weighing mode, the above two symbol indications change to
Range 2 and Range 1 and the two symbol indications are off.

2-3-2 Check Weighing

Refer to the operation of check weighing in weighing function.

2-3-3 Totalizing

Refer to the operation of totalizing in weighing function.
02029010
key to select sample quantity from 10, 20, 50,100 and the display
, ,
.
 Sample is less than 20 divisions.
. .
)
. . .
. . . .
 Unit weight is less than 0.2 division.
)
Pcs
accordingly.
".
(0.1 d for Brazil regulation)
13 ZSME300000363