Table of Contents
Advertisement
3.6 On Board Power Supply
The on board power supply generates all necessary voltages from the single supply voltage of 5
volts. The generated 3.3 volts are available on the connectors "Flat Panel" and "LVDS".
Note
Power Connector
Connector type JST B15B-EH-A 15 pin
Adapter cable
Note
TME-104P-CSR-LX800-R1V5.doc
This 3.3 V must not be used to supply external electronic devices with high
power consumption like other PC/104 boards or displays.
available, art.no 862-0044-10
Pin
Signal (standard)
1
2
3
4
5
6
7
8
9
10
11
+12V (only for PC104 slot
12
and backlight power
supply)
+12V (only for PC104 slot
13
and backlight power
supply)
14
15
-12V (only for PC104 slot)
The default cable adapter supports the connection of
If the 5V only power supply is required leave these pins open.
The board can also be supplied over PC/104- or PC/104 plus bus.
Signal (5V only)
+5V
GND
+5V
GND
+5V
n.c.
GND
GND
n.c.
n.c.
GND
GND
Rev 1.5
+5V
GND
+5V
GND
+5V
n.c.
GND
GND
n.c
n.c
GND
n.c
n.c
GND
n.c
±
12V power supply.
18 (44)
Advertisement
Table of Contents
