The PCI Configuration menu contents options about PCI interrupts and USB.
Here the PCI ports can be assigned to an interrupt.
In the USB Settings the different controllers can be selected. Port 4 can be changed to client mode.
Note:
System Clock/PLL Configuration lets you define the CPU and PLL settings.
Note:
TME-104P-CSR-LX800-R1V5.doc
If you have an external ISA card that needs e.g. IRQ 5, PCI
Interrupt steering must be configured in a way that none of the
PCI interrupt request is routed to IRQ 5. In this example it would
be possible to steer PCI INTC# to IRQ 10.
CPU Multipliers above 15 (500Mhz) may seriously damage the
CPU!
Rev 1.5
34 (44)