1MRK 514 027-UEN D
2.4
Note signs
650 series
Installation manual
Always transport PCBs (modules) using certified conductive bags.
Do not connect live wires to the IED. Internal circuitry may be damaged
Always use a conductive wrist strap connected to protective earth when
replacing modules. Electrostatic discharge (ESD) may damage the module and
IED circuitry.
Take care to avoid electrical shock during installation and commissioning.
Changing the active setting group will inevitably change the IEDs operation. Be
careful and check regulations before making the change.
Observe the maximum allowed continuous current for the different current
transformer inputs of the IED. See technical data.
© Copyright 2017 ABB. All rights reserved
Section 2
Safety information
M2695-2 v2
M2696-2 v1
M2697-2 v2
M2698-2 v2
M2693-2 v1
IP1497-1 v1
M19-2 v3
13