Nav TV W204PGM Operation Instructions

NAV-TV
www.nav-tv.com
W204PGM / W204VIM
Backup camera / AV input interface / Video In Motion
Operation Instructions

To Activate Rear View Camera

With the brake depressed and engine
running, engage reverse gear.
Rear View Camera will show on COMAND
screen.
Note: Only one device may be set a time, AUX Video or Backup camera.
Please refer to the programming section for selecting AUX Video VS. Backup camera.

To Activate AUX Video

Select "Video"
Select "Aux"
NOTE: Video will be disabled in motion if W204VIM
is not installed and activated !

To Activate Video in motion (W204VIM option)

Press and hold "Return" button on steering wheel
for 3 seconds to activate VIM.
Repeat to de-activate video in motion.
NOTE: GPS Navigation does not function while
VIM is active.
Agreement: End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. Would not be held liable for misuse of it's product.
If you do not agree, please discontinue use immediately and return product to place of purchase.
WARNING: Check entire surroundings while backing. Do not become distracted by using COMAND.
2008-up Mercedes C-Class W204
This product is intended for off-road use and passenger entertainment only.
100 NW 11 th street, Boca Raton, FL 33432
Tel. 561-955-9770 Fax. 561-955-9760
info@nav-tv.com
Fig. 1 - Vehicle in Reverse
Fig. 2 - AUX Video
Fig. 3 - Video in motion
W204 11.23.2007
Rev. 1.0 Moni