Status Monitor 3; Nozzle Check; Head Cleaning; Print Head Alignment - Epson Stylus Scan 2000 User Manual

Status Monitor 3

This utility provides you with printer status information, such as
the amount of ink remaining, and checks for printer errors.
The utility is available only if these two conditions are met.
The EPSON Stylus Scan is connected directly to the host
computer's parallel port or USB port.
Your system is configured to support bidirectional
communication.

Nozzle Check

This utility checks the print head nozzles for clogging.
Check the nozzles if you notice print or copy quality has declined
and also after cleaning to confirm that the print head nozzles have
been cleaned. If the nozzle check indicates the print head needs
cleaning, you can access the Head Cleaning utility directly from
the Nozzle Check utility. See "Checking the Print Head Nozzles"
on page 11-2.

Head Cleaning

This utility cleans the print head.
You may need to clean the head when you notice print quality has
declined. Use the Nozzle Check utility first to confirm that the
head needs to be cleaned. You can access the Nozzle Check utility
directly from the Head Cleaning utility. See "Cleaning the Print
Head" on page 11-5.

Print Head Alignment

This utility aligns the print head. Use if you notice a misalignment
of vertical lines in your printouts.
4-22
Using the Printer Software for Windows