A Few Precautions; When Using The Stylus Scan; When Handling The Ink Cartridges - Epson Stylus Scan 2000 User Manual

Do not attempt to service the EPSON Stylus Scan yourself.
Unplug the Stylus Scan and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the
Stylus Scan; the Stylus Scan has been dropped or the cabinet
damaged; the Stylus Scan does not operate normally or
exhibits a distinct change in performance.
To provide adequate short-circuit protection and over-
current protection for this Stylus Scan, the building
installation must be protected by a 16 Amp circuit breaker.

A Few Precautions

When using the Stylus Scan

Do not put your hand inside the Stylus Scan or touch the ink
cartridges during operation.
Do not move the print head by hand. Doing so may damage
the EPSON Stylus Scan.
Always use the
After pressing this button, the
then goes off. Do not unplug the Stylus Scan or turn off the
power to the outlet until the
Before transporting the Stylus Scan, make sure the print head
is in the home (far right) position and the ink cartridges are
in place.

When handling the ink cartridges

Keep ink cartridges out of the reach of children. Do not allow
children to drink the ink or otherwise handle the cartridges.
power button to turn off the Stylus Scan.
P
P
P
power light flashes briefly
power light stops flashing.
Safety Instructions
2-3