Transporting The Epson Stylus Scan - Epson Stylus Scan 2000 User Manual

Transporting the EPSON Stylus Scan

If you need to transport your EPSON Stylus Scan, carefully repack
it using the original box and packing materials as follows.
1. Open the front cover and make sure that the print head is in
the home (far right) position. If it isn't, turn on the Stylus Scan
and wait until the print head returns to the home position.
Then turn off the Stylus Scan and close the front cover.
c
2. Make sure that the top/front cover is closed.
3. Unplug the power cord from the electrical outlet; then
disconnect the interface cable.
4. Remove all paper from the paper feeder, and then remove the
paper supports.
5. Push in the output extension tray, and then raise the output
tray.
6. Open the front cover again. Secure the ink cartridge holder to
the body of the Stylus Scan with tape as shown below. Then
close the cover.
Caution:
Leave the ink cartridges installed during transport.
Removing the cartridges for transport may damage the
Stylus Scan and the cartridges will become unusable.
11-15
Maintenance