Controlling Background Printing - Epson Stylus Scan 2000 User Manual

The options in this dialog box allow you to make the following
settings.
Error notification
Warning
Temporary Spool
folder
Temporary High Speed
Copies folder
Data will be sent to the
printer after being
stored on your disk
Check for errors before
starting to print.
Check the ink level
before starting to print.

Controlling Background Printing

After you send a print job to the EPSON Stylus Scan, you can use
the EPSON Monitor3 utility to check cancel, or change the priority
of the print jobs that are queued for printing. This utility also
shows the status of the job currently being printed.
Note:
If the installation of a new application makes it impossible to use
Background Printing, this is because some of the Extension files used by
Background Printing have been overwritten as previous versions of
themselves by the new application 's installer. Re-install the Stylus Scan
driver to solve this problem.
7-4
Checking Printer Status and Managing the Print Jobs for Macintosh
Choose how the StatusMonitor notifies you in
case of an error.
Choose how the StatusMonitor notifies you if
a warning message becomes necessary.
Choose the folder for temporary spooling of
print data.
Choose the folders for multiple-copy print data
storage.
Select this check box to send the data
together after the printing command file is
made. When this check box is selected, the
data is sent to the printer after making the
command file for pages which are necessary
for printing. This can prevent horizontal
banding in your printout.
Select this check box if you want to check for
errors before printing.
Select this check box to check the ink level
before printing.