Using The Status Monitor 3; Replacing An Old Or Damaged Ink Cartridge - Epson Stylus Scan 2000 User Manual

Using the Status Monitor 3

You can monitor the remaining ink level from your computer and
view on-screen instructions for replacing a low or empty ink
cartridge.
When an ink cartridge is low or empty and you are ready to
replace it, click the How To button in the Status Monitor's Printer
Status window. The print head moves to the ink cartridge
replacement position. Follow the on-screen instructions to replace
the cartridge.

Replacing an Old or Damaged Ink Cartridge

In some circumstances you may need to replace an ink cartridge
before it is empty. For example, if the quality of your prints and
copies remains poor even after repeated cleaning and aligning of
the print head, one or both of the ink cartridges may be old or
damaged and should be replaced.
To replace an ink cartridge before the
light flashes, follow these steps.
If the color or
A
the empty ink cartridge as described in "Replacing Empty Ink
Cartridges" on page 10-2.
c
Caution:
1. Make sure the Stylus Scan is on. The
on, but not flashing.
2. Lower the output tray; then open the front cover.
black ink out light is flashing or is on, replace
B
Once you remove an ink cartridge, it becomes unusable and
cannot be reinstalled even if ink remains.
Leave the old cartridge installed in the EPSON Stylus Scan
until you are ready to replace it with a new one.
color or
A
power light should be
P
Replacing Ink Cartridges
black ink out
B
10-11