To Restore The Solaris Operating Environment And Netra Proxy Cache Packages - Sun Microsystems Netra Proxy Cache 1.0 Upgrade Instructions

To Restore the Solaris Operating Environment and
Netra Proxy Cache Packages
1. Replace the hard disk, following the procedure specified in the Netra Proxy
Cache Server Service Manual.
2. Ensure that you have a terminal connected to your Netra Proxy Cache Server, as
described in Appendix A of the Netra Proxy Cache Array Configuration Guide
or Netra Proxy Cache Server Configuration Guide.
3. With your Netra Proxy Cache Server connected to both service and control
networks, power up your server.
4. Insert the Netra Proxy Cache Server recovery CD in the server's CD drive.
This is the CD that was shipped with the Netra Proxy Cache Server product.
5. Send the RS232 break signal to obtain the ok prompt.
For tip use:
<return>~#
For telnet, use Ctrl-]. For other programs, use the appropriate break signal.
6. At the ok prompt, enter:
ok boot cdrom
The Solaris boot process starts. The following prompt is displayed:
Please confirm that you want to reinstall Netra Proxy Cache 1.0.
This will ERASE ALL EXISTING DATA on the system.
Answer yes, no or quit: y
7. Enter y to the preceding prompt.
The entire process takes about an hour. The process completes when the server
returns to the ok prompt.
8. Using the upgrade CD, perform Step 1 on page 4 through Step 1 on page 4, on
Step 1 on page 9.
9. At the serial terminal from which you invoked the upgrade script, enter the
following command to halt the server:
# init 0
Netra Proxy Cache Server to Array Upgrade Instructions
11