System Recovery - Sun Microsystems Netra Proxy Cache 1.0 Upgrade Instructions

11. Install your array configuration on all hosts in your array, as described on page
3-17 of the Netra Proxy Cache Array Configuration Guide.
12. Back up your configuration to diskette, as described on page 3-21 of the Netra
Proxy Cache Array Configuration Guide.
13. Update your DNS, as described on page 3-23 of the Netra Proxy Cache Array
Configuration Guide.
At this point, clients can use the proxy cache service provided by the Netra Proxy
Cache Array.

System Recovery

This section specifies the procedure for recovery should the hard disk from which
you boot fail. You need both the Netra Proxy Cache recovery CD and the Netra
Proxy Cache 1.0 Server to Array Upgrade CD to complete the recovery procedure.
The recovery CD is shipped with the Netra Proxy Cache Server product. The
upgrade CD is shipped with this document.
Note -
the backup diskette you were instructed to create in Step 1 on page 4 on Step 12 on
page 10. If you do not have such a diskette, you can still recover, but you must
repeat some of the configuration steps described in the Netra Proxy Cache Array
Configuration Guide.
The procedure described below performs the following tasks:
4 Formats your hard disks and installs the partition map appropriate for a Netra
Proxy Cache Server
4 Installs the Solaris
4 Installs the Netra Proxy Cache product packages
The recovery procedure for a Netra Proxy Cache Server that has been upgraded to
the array form of the product is different from both the non-array server and the
machine purchased as a Netra Proxy Cache Array host. The recovery procedure for a
Netra Proxy Cache Array host is described in Appendix A of the Netra Proxy Cache
Array Configuration Guide.
Netra Proxy Cache 1.0 Server to Array Upgrade Instructions ♦ Revision A, March 1998
10
A nearly indispensable aid to the recovery of a Netra Proxy Cache Server is
TM
operating environment