Advertisement
PROGRAMMING
DELETE TRANSMITTERS
J2
J1
4
3
2
1
Deleting individual call- /priority transmitter
c
R
d
Tx
R
R
Q/S
J2
J1
4
3
2
1
Deleting call- /priority transmitter complitly
R
R
Q/S
J2
J1
4
3
2
1
Deleting individual acknowledgement- /switch transmitter
c
d
Q/S
R
Q/S
J2
J1
4
3
2
1
Deleting acknowledgment- /switch transmitter complitly
c
d
Q/S
Q/S
R
GENERAL INFORMATION
Disposal
Waste electrical products not be disposed of
with household waste!
Dispose of the waste product via a col-
lection point for electronic scrap or via
your specialist dealer.
Put the packaging material into the
recycling bins for cardboard, paper and
plastics.
Operation
[ P r e s s b u t t o n ]
R
>1.6 s
>1,6 s
<1.6 s
<1,6 s
Tx
A/B/
C/D
If an attempt is made to delete an acknowledgment or switching transmitter,
there is at reaction on the RCL07.
R
>1.6 s
>1.6 s
R
Q/S
Q/S
>1.6 s
>1,6 s
Tx
<1.6 s
<1,6 s
A
C
Tx
A/B/
B
D
C/D
If an attempt is made to delete an acknowledgment or switching transmitter,
there is at reaction on the RCL07.
Q/S
Q/S
>1.6 s
>1,6 s
Q/S
>1.6 s
>1,6 s
Q/S
Warranty
Within the statutory warranty period we undertake
to rectify free of charge by repair or replacement
any product defects arising from material or pro-
duction faults.
Any unauthorized tampering with, or modifications
to, the product shall render this warranty null and
void.
Conformity
Hereby, ELDAT GmbH declares that the radio
equipment type RCL07 is in compliance with Di-
rective 2014/53/EU. The full text of the EU dec-
laration of conformity is available at the following
internet address:
Display
>1.6 s
LED R flashes rapidly
<1.6 s
LED R illuminates
for approx. 2 s
>1.6 s
LED R flashes rapidly
>1.6 s
LED R illuminates
for approx. 2 s
>1.6 s
LED Q/S flashes rapidly
<1.6 s
LED R illuminates for
approx. 2 s
>1.6 s
LED Q/S flashes rapidly
>1.6 s
LED Q/S illuminates for
approx. 2 s
www.eldat.de
Description
The receiver is in delete mode for 30 seconds.
Delete the required transmission code during
this period. After the period has expired, the
receiver changes to operation mode.
To cancel the programming press 1x briefly
(<1.6 s) button R.
Press the transmitter button to delete.
The transmission code is deleted and the
receiver changes to operation mode.
The receiver is in delete mode for approx.
30 seconds. Again press the button R during
this period. After the period has expired, the
receiver changes to operation mode.
To cancel the programming press 1x briefly
(<1.6 s) button R.
All transmission codes of the call- or priority
transmitters have been deleted and the
receiver changes to ready for operation.
The receiver is in delete mode for 30 seconds.
Delete the required transmission code during
this period. After the period has expired, the
receiver changes to operation mode.
To cancel the programming press 1x briefly
(<1.6 s) button Q/S.
Press the transmitter button to delete.
The transmission code is deleted and
the receiver changes to operation mode.
The receiver is in delete mode for approx.
30 seconds. Again press the button Q/S
during this period. After the period has expired,
the receiver changes to operation mode.
To cancel the programming press 1x briefly
(<1.6 s) button Q/S.
All transmission codes of the acknowled-
gement- /switch transmitters have been
deleted and the receiver changes to ready
for operation.
Customer Service
If the device does not work properly despite prop-
er handling or in case of damage, please contact
the manufacturer or your retailer.
ELDAT GmbH
Im Gewerbepark 14
15711 Königs Wusterhausen
Germany
Phone:
+ 49 (0) 33 75 / 90 37-310
Fax:
+ 49 (0) 33 75 / 90 37-90
Internet: www.eldat.de
E-Mail:
info@eldat.de
Advertisement
