Advertisement
PROGRAMMING
Programming priority transmitter
J2
J1
4
3
2
1
c
Q/S
R
Q/S
R
d
e
Programming acknowledgment transmitter
J2
J1
4
3
2
1
c
d
Q/S
Q/S
R
Programming a switching transmitter
4
3
2
1
c
d
e
Q/S
R
Q/S
Q/S
programming button Q/S
R
programming button R
Tx
transmitter button
OM
Operating mode
Operation
[ P r e s s b u t t o n ]
With priority transmitters, a care call can be initiated even if the RCL07 is deactivated.
R
R
<1.6 s
<1,6 s
ON/OFF
1x R BA EIN/AUS
2x R BA IMPULS
PULSE
R
Operating
3x R Betriebs-
mode
bereitschaft
Q/S <1.6 s LED R and Q/S flash in
Q/S
<1.6 s
<1,6 s
Tx
<1.6 s
<1,6 s
Tx <1.6 s LED R illuminates
You can use a acknowledge transmitter to acknowledge a care call received.
Q/S <1.6 s LED R flashes slowly
Q/S
<1.6 s
<1,6 s
Tx
<1.6 s
<1,6 s
A
D
Tx
A/B/
C/D
B
C
Switching transmitter: Activation or deactivation of the care function.
Q/S <1.6 s LED Q/S flashes slowly
Q/S
<1.6 s
<1,6 s
Q/S
<1.6 s
<1,6 s
Q/S <1.6 s LED Q/S flash in cycles of two
Tx
<1.6 s
<1,6 s
A
D
B
C
Tx
A/C
Activate care function:
Deactivate care function:
Display LED RCL07
<1.6 s LED R flashes slowly
(1x|break|1x| ...)
<1.6 s LED R flash in cycles of two
(2x|break|2x| ...)
cycles of the selected OM
for approx. 4 s
(1x|break|1x| ...)
<1.6 s LED Q/S illuminates
for approx. 4 s
(1x|break|1x| ...)
(2x|break|2x| ...)
<1.6 s ED Q/S illuminates
for approx. 4 s
Press transmitter button B or D. LED I/O flashes green.
Calls are ignored for 15 minutes.
Press transmitter button A or C. LED I/O illuminates green.
Calls are signaled again.
Description
Programming mode
OM ON/OFF selected
Programming mode
OM PULSE selected
Programming mode priority transmitter
The receiver is in programming mode for approx.
30 seconds. Programming the transmission code
during this period, after the period has expired, the
receiver changes to operation mode.
Press the transmitter button and the transmission
code is transmitted.
The operating mode set at the receiver is accepted
with the save procedure and is applicable for
the transmission code saved. Subsequently, the
receiver changes to operation mode.
Flashes the LED R quickly for approx. 4 seconds,
all 32 memory spaces are allocated.
knowledgment transmitter
Programming mode ac
The receiver is in programming mode for approx.
30 seconds. Programming the transmission code
during this period.
After the period has expired, the receiver changes
to operation mode. To cancel the programming
press 2x briefly (<1.6 s) button Q/S.
Press the transmitter button with which you wish to
acknowledge. The transmission code (A/B/C/D) is
transmitted and the receiver changes to operation
mode.
Flashes the LED Q/S quickly for approx. 4 sec-
onds, all 8 memory spaces are allocated.
knowledgment transmitter
Programming mode ac
Programming mode switching
The receiver is in programming mode for the switch-
ing transmitter for approx. 30 seconds. Program-
ming the transmission code during this period.
After the period has expired, the receiver changes
to operation mode.
To cancel the programming press 1x briefly (<1.6 s)
button
Q/S.
Press the transmitter button A or C, the transmis-
sion codes are transmitted (Code B and D are
automatically allocated). The receiver changes to
ready for operation.
Flashes the LED Q/S quickly for approx. 4 seconds,
all 8 memory spaces are allocated.
transmitter
3
Advertisement
