Lenovo RackSwitch G8272 Installation Manual page 78

78
G8272 Installation Guide
Lenovo Cloud Network Operating System (CNOS):

Erase the switch startup configuration:
G8272> enable
G8272# write erase
Warning: This command will erase the startup-configuration.
Do you wish to proceed anyway? (y/n) [n] y
Enter y at the prompt to confirm the erasing process and then reload the switch:
G8272# reload
 If using Lenovo Enterprise Network OS, press and hold the reset button for
more than five seconds. For more details, see
Using the Management Boot Menu by selecting Change configuration to

factory default. For more details, see
page 83.
"Reset Button" on page
"The Boot Management Menu" on
24.