Out-Of-Band Management Interface Configuration - Lenovo RackSwitch G8272 Installation Manual

Out-of-Band Management Interface Configuration

1. Log onto the switch using the serial console port or management port on the G8272
2. Enter the management interface configuration mode:
3. Configure an IP address and subnet mask:
4. Configure the out-of-band default gateway:
80
G8272 Installation Guide
Complete the following steps to configure an out-of-band management IP address
and a default gateway:
front panel.
 Lenovo Enterprise Network Operating System (ENOS):
G8272> enable
G8272# configure [terminal]
G8272(config)# interface ip 128
G8272(config-ip-if)#
 Lenovo Cloud Network Operating System (CNOS):
G8272> enable
G8272# configure [terminal]
G8272(config)# interface mgmt 0
G8272(config-if)#
 Lenovo Enterprise Network Operating System (ENOS):
G8272(config-ip-if)# ip address 10.254.87.6 255.255.255.0 enable
G8272(config-ip-if)# exit
G8272(config)#
 Lenovo Cloud Network Operating System (CNOS):
G8272(config-if)# ip address 10.254.87.6/24
G8272(config-if)# exit
G8272(config)#
Lenovo Enterprise Network Operating System (ENOS):

G8272(config)# ip gateway 4 address 205.21.17.1 enable
 Lenovo Cloud Network Operating System (CNOS):
G8272(config)# vrf context management
G8272(config-vrf)# ip route 0.0.0.0/0 205.21.17.1
G8272(config-vrf)# exit
G8272(config)#