Lenovo RackSwitch G8272 Installation Manual page 44

4. From the front, slide the switch into the rack at the desired height.
5. Secure the switch to the front rack posts with M6 screws (Item 3), washers
6. Slide the rear mounting brackets (Item 7 and Item 8) into the slots available on the
44
G8272 Installation Guide
(Item 10), and either clip nuts (Item 4) or cage nuts (Item 5). Torque the screws to
approximately 5.7 Nm ± 0.1 Nm (50 inch-pounds).
front mounting brackets.
3
10
7
8
5