Replacing The Power-Button Module; Procedure - Dell Inspiron 3471 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1. Route the power-button board cable through the slot on the front panel.
2. Connect the power-button board cable to the system board.
3. Slide the front-I/O bracket into the slots on the chassis and align the screw holes on the front-I/O panel with the screw holes on the
chassis.
4. Replace the screw (#6-32x6.35) that secures the front-I/O bracket to the chassis.

Replacing the power-button module

computer. After working inside your computer, follow the instructions in
Replacing the power-button module
29
After
51