Replacing The Power-Button Module; Procedure; Post-Requisites - Dell XPS 8930 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Route the cable through the slot on the top of the chassis.
2 Align the screw hole on the power-button module with the screw hole on the chassis.
3 Replace the screw that secures the power-button module to the top chassis.
4 Route the power-button module cable through the routing guides on the chassis.
5 Connect the power-button module cable to the system board.
For more information, see
Post-requisites
1 Follow the procedure from step 9 to step 10 in
2 Replace the top cover.
3 Replace the front bezel.
4 Replace the optical drive.
5 Replace the right-side cover.
62

Replacing the power-button module

Replacing the power-button module
computer. After working inside your computer, follow the instructions in
"System-board components".
"Replacing the power-supply
www.dell.com/
unit".
31
After working inside