Replacing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Slide the power button into its socket.
2
Connect the power-button cable to the system board.
3
Close the side-chassis.
Post-requisites
1
Replace the
front
2
Replace the
computer
computer. After working inside your computer, follow
After working inside your
bezel.
cover.
computer. For more safety best
www.dell.com/
Before
63