Removing The Power-Supply Unit; Prerequisites; Procedure - Dell Inspiron 3471 Service Manual

Hide thumbs Also See for Inspiron 3471:
Table of Contents

Advertisement

NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the
computer
cover.
2. Remove the
front
bezel.
3. Follow the procedure from step 1 to step 6 in

Procedure

1. Press the securing clip and disconnect the power-supply unit cable (ATX_CPU) from the system board.
2. Press the securing clip and disconnect the power-supply unit cable (ATX_SYS) from the system board.
3. Note the power-supply unit cable routing and remove the power-supply unit cable from the routing guides on the chassis.
4. Remove the three screws (#6-32x6.35) that secure the power-supply unit to the chassis.
5. Press the clamp and slide the power-supply unit towards the front of the chassis to release it from the chassis.
6. Lift the power-supply unit, along with the cables, off the chassis.

Removing the power-supply unit

computer. After working inside your computer, follow the instructions in
"Removing the optical
drive".
Removing the power-supply unit
30
After
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents