Post-requisites
Replace the
computer
cover.
Clearing CMOS settings
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the
computer
cover.
Procedure
1. Locate the CMOS jumper (CMCL R2) on the system board. Remove the jumper plug from the password jumper-pins (PSWD) and
connect it to the CMOS jumper-pins.
NOTE:
For more information on the location of the jumper, see
2. Wait for five seconds.
3. Replace the jumper plug to its original location.
76
System setup
computer. After working inside your computer, follow the instructions in
"System-board
components".
After