Table of Contents
Advertisement
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Secured to
Computer cover
Chassis
2.5-inch hard drive(s)
Drive cage
NOTE:
Depending
on the
configuration
ordered, there may
be up to two 2.5-
inch hard drives
installed.
2.5-inch hard drive(s)
Hard-drive bracket
NOTE:
Depending
on the
configuration
ordered, there may
be up to two 2.5-
inch hard drives
installed.
3.5-inch hard drive
Drive cage
3.5-inch hard drive
Hard-drive bracket
Drive cage
Chassis
Optical drive
Optical-drive bracket
Wireless card
System board
Power-supply unit
Chassis
Screw type
Quantity
#6-32x6.35
2
#6-32x6.35
1
M3x3.5
4 (for each hard drive)
#6-32x6.35
2
#6-32x3.6
2
#6-32x6.35
1
M2x2
3
M2x3.5
1
#6-32x6.35
3
3
Screw list
Screw image
Screw list
11
Hide quick links:
Advertisement
Table of Contents
