Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
2. Align and place the wireless-card bracket on to the wireless card.
3. Align the notch on the wireless card with the tab on the wireless-card slot and slide the wireless card at an angle into the wireless-card
slot.
4. Replace the screw (M2x3.5) that secures the wireless card to the system board.
Post-requisites
1. Follow the procedure from step 5 to step 8 in
2. Replace the
front
bezel.
3. Replace the
computer
cover.
Replacing the wireless card
computer. After working inside your computer, follow the instructions in
Antenna-cable color
White
Black
"Replacing the optical
drive".
Replacing the wireless card
23
After
43
Hide quick links:
Advertisement
Table of Contents
