Replacing The Power-Button Module; Procedure; Post-Requisites - Dell XPS 8920 Service Manual

Replacing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Route the cable through the slot on the top of the chassis.
2 Align the screw hole on the power-button module with the screw hole on the
chassis.
3 Replace the screw that secures the power-button module to the top chassis.
4 Route the power-button module cable through the routing guides on the chassis.
5 Connect the power-button module cable to the system board.
For more information, see

Post-requisites

1 Replace the front
2 Replace the top
3 Replace the right-side
84
computer. After working inside your computer, follow
After working inside your
"System-board
bezel.
cover.
cover.
computer. For more safety best
components".
Before
www.dell.com/