NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the
computer
cover.
2. Remove the
front
bezel.
Procedure
1. Place the computer on its side to access the parts inside the chassis.
2. Remove the two screws (#6-32x6.35) that secure the drive cage to the chassis.
3. Push the release tab on the chassis and slide the drive cage to release it from the chassis
4. Disconnect the data cable and power cable from the optical drive.
5. Disconnect the data cables and power cables from the hard drives.
6. Lift the drive cage out of the chassis.
32
Removing the optical drive
Removing the optical drive
computer. After working inside your computer, follow the instructions in
16
After