Table of Contents
Advertisement
System Configuration
Drives
SMART Reporting
USB Configuration
Front USB Configuration
Rear USB Configuration
Audio
Miscellaneous Devices
Table 5. System setup options—Video menu
Video
Primary Display
70
System setup
•
RAID On (default)
Enable or disable various drives on board.
•
SATA-0
•
SATA-1
•
SATA-2
•
SATA-3
•
M.2 PCIe SSD-0
By default, all the check boxes are selected.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology (SMART)
during system startup. This option is disabled by default.
Configures the integrated USB controller. If Boot Support is enabled, the computer is
allowed to boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, the device attached to this port is enabled and available for
OS.
If USB port is disabled, the OS cannot detect any device attached to this port.
•
Enable USB Boot Support
•
Enable Front USB Ports
•
Enable Rear USB Ports
By default, all the check boxes are selected.
NOTE:
USB keyboard and mouse always work in the BIOS setup
irrespective of these settings.
Enable or disable the front USB ports.
•
Front Port 1
•
Front Port 2
By default, all the check boxes are selected.
Enable or disable the rear USB ports.
•
Rear Port 1
•
Rear Port 2
•
Rear Port 3
•
Rear Port 4
By default, all the check boxes are selected.
Enable or disable the integrated audio controller.
By default, Enable Audio is selected.
Enable or disable the Secure Digital (SD) card reader.
By default, Enable Secure Digital (SD) Card is selected.
This option determines which video controller becomes the primary display when
multiple controllers are available in the computer.
•
Auto (default)
•
Intel HD Graphics
Hide quick links:
Advertisement
Table of Contents
